Maintance - REHASHOP Falcon A005491 Gebrauchsanleitung

Brake adjustment is carried out like this:
Turn the adjuster screw anti-clockwise to increase the tension then lock the adjustment
by turning the locking nut clockwise while holding the adjuster screw stationary. Brake
adjustment reduced to allow light pressure may be ineffective on the brake in the locked
position.
Pictured: Locking Nut & Adjustment Screw

Maintance

Over a period of time the brake cables may stretch, and if no further adjustments can be
made the cables should be replaced. Seek the help of your dealer when replacing brake
cables.
Castors should be checked that they are secure each time before using the rollator. Also
check if the brakes operate correctly and if the handles and hand knobs are secure. Should
any part of the rollator appear loose or insecure stop using the rollator until it is inspected
by an authorised dealer. The following shows maintenance schedule.
Weekly:
Check brake for malfunction. Check all wheels and castors for loose bolts, nuts and knobs.
Periodically:
Check hand grips for wear. Check if frame bolts are secure. Check if front and rear axle
bolts are secure. Check tyres for wear or cracks.
Yearly:
Take your rollator to an authorised repairer for a full check, clean, service and lubrication
of all moving parts one a year.
Serviceable components: Wheels, hand grips, brake cables, brake lever, bearings, knobs,
bag, bolt, nut.
NL
GB
17