Handle Adjustment; Break Operation & Adjustment - REHASHOP Falcon A005491 Gebrauchsanleitung

Handle adjustment

The rollator ´s handles can be adjusted in height to suit different users. Simply depress the
spring button and set to the desired height. Repeat this for the opposite side and make sure
that both handles are secure and set at the same height before use.
NL
GB
16
The spring button should be located in the
same position on either side.
1. Pull up on brake handle lever to slow the
rollator
2. Push down on brake handle lever to lock
the rear wheels, pull up on the brake
lever handle to release the lock.
Brakes must be applied in the lock
position when the seat is going to be
used, pre check the lock by pushing
forward the rollator.