Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MS-7672 Mainboard
MS-7672 Mainboard
Fan Power Connectors: CPUFAN1,SYSFAN1~4
The fan power connectors support system cooling fan with +12V. When connecting the
wire to the connectors, always note that the red wire is the positive and should be con-
nected to the +12V; the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
•
Please refer to the recommended CPU fans at processor's official website or consult
the vendors for proper CPU cooling fan.
•
CPUFAN1 support Smart fan control. You can install Control Center utility that will
automatically control the CPUFAN1 speeds according to the actual CPUFAN1 tem-
peratures.
Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN1.
•
DLED3 Connector: JDLED3 (optional)
This is reserved for connecting the MSI future control card.
En-16
SYSFAN1~4
Werbung
Inhaltsverzeichnis
