Mennekes 18516 Installationsanleitung Seite 5

The foundation fixing set is required in order to manufac-
ture a foundation yourself. The following MENNEKES pro-
ducts can then be mounted on the foundation:
„ Charging stations: Basic (S)
„ Charging stations: Premium (S)
„ Charging stations: Smart (S)
In addition to the foundation fixing set, the foundation plate
18514 is required.
Delivery contents
„ 16 x hexagon nuts (M12, steel, galvanised)
„ 16 x washers (steel, galvanised)
„ 4 x threaded rods (M12 x 750, strength class 4.6, steel,
galvanised)
„ 3 x flat steel bars with identical holes (steel, galvanised)
Installation
B
Fig. 1: Dimensions [mm]
f Insert the threaded rods into the flat steel bars taking
account of the dimensions in the Fig. 1. Make sure that
the flat steel bar (A) and the flat steel bars (B) are arran-
ged at right angles (90°).
B
A
1
Fig. 2: Position of the washers and nuts [mm]
f Secure each flat steel bar with a nut and a washer,
taking account of the Fig. 2. Make sure that the founda-
tion fixing set is aligned in the horizontal position.
f Assemble the associated foundation plate (1) (available
as an accessory), taking account of the Fig. 2 on the
foundation fixing set.
The remaining four washers and nuts are for fixing the pro-
duct to the foundation fixing set.

Observe the operating and installation instructions for
the respective product.
EN
1