General Tv Operation; Using The Channel List; Electronic Programme Guide (Epg) - Horizon 6-Serie Nutzerhandbuch

Installation Menu Contents
Automatic channel Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
scan (Retune) Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Manual Channel
This feature can be used for direct broadcast entry.
Scan
Network Channel Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
Scan channels. Digital Cable: Searches for cable network channels.
Analogue Fine
Tune channels are stored.
Displays installation settings menu. Standby Mode Search(*) : Your TV will search for new or missing
channels while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*)
Installation
: If this option is set as Enabled, the changes on the broadcasts such as frequency, channel name,
Settings (Optional)
subtitle language etc., will be applied automatically while watching.
(*) Availability depends on model.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
Clear Service List
to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related informations such as signal level/quality, network
Signal Information
name etc for available frequencies.
First Time
Deletes all stored channels and settings, resets TV to factory settings.
Installation
English - 14 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.Press the OK button to open the Channel
List
Blue button or open the Edit Channel List menu by
pressing the Green button in order to make advanced
changes in the current list.
Managing the Favourite Lists
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on the
list. You can make multiple choices by pressing the
Yellow button. Then press the OK button to open the
Channel Edit Options menu and select Add/Remove
Favourites option. Press the OK button again. Set the
desired list option to On. The selected channel/s will
be added to the list. In order to remove a channel or
channels from a favourite list follow the same steps
and set the desired list option to .
You can use the Filter function in the Edit Channel
List Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed everytime the Channel list is opened.
Channel list menu will only
Channel list in order to
not remain the next time the Channel list is opened if
you don't save them. To save the changes on the list
press the Red Channel
list is displayed on the screen.
The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are
located in the System>Settings>Parental menu.
To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN
number, Parental Settings menu will be displayed.
Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.
Maturity Lock: If this option is set, TV gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Note: First Time Installation is
Maturity Lock's value will be
set to 18 as default.
Child Lock: If this option is set to ON, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.
Set PIN
Default CICAM PIN: This option will appear as greyed
out if no CI module is inserted into the CI slot of the
TV. You can change the default PIN of the CI CAM
using this option.
Note: 0000 or 1234
selection) during the First Time Installation
Some options may not be available depending on the country
selection in the First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their broadcast
schedules. Press the Epg button to view the
Programme Guide menu.
There are 3 different types of schedule layouts
available, Timeline Schedule, List Schedule and
Now/Next Schedule. To switch between them follow
the instructions on the bottom of the screen.
Timeline Schedule
Zoom (Yellow button): Press the Yellow button to
see events in a wider time interval.
Filter (Blue button):
Highlight Genre (Subtitles button): Displays
Highlight Genre menu. Using this feature, you can
search the programme guide database in accordance
with the genre. Info available in the programme guide
will be searched and results matching your criteria
will be highlighted.
Options (OK button): Displays event options.
Event Details (Info button): Displays detailed
information about selected events.
Next/Prev Day (Programme +/- buttons): Displays
the events of previous or next day.
Search (Text button): Displays Guide Search menu.
Now (Source button): Displays current event of the
highlighted channel.
List Schedule(*)
(*)
.
Prev. Time Slice (Red button): Displays the events
of previous time slice.
Next/Prev Day (Programme +/- buttons): Displays
the events of previous or next day.
Event Details (Info button): Displays detailed
information about selected events.
Filter (Text button):
Next Time Slice (Green button): Displays the events
of next time slice.
Options (OK button): Displays event options.
Now/Next Schedule
Options (OK button): Displays event options.
English - 15 -