Intended Use; Safety Instructions - Simons Voss Technologies SmartCD.MP Kurzanleitung

1. Intended use

1 Intended use
SmartCD.MP can be used to program SimonsVoss Mifare® Pure
SmartCard products. These include the following items:




This device is also supplied as a SmartIntego variant. If you use this
device for SmartIntego components, please refer to the SmartIntego
documentation for commissioning and programming.

2 Safety instructions







14 / 72
SmartCards or SmartTags
Cylinder SC (.MP)
SmartHandle SC (.MP)
SmartRelay SC (.MP)
Avoid placing in direct sunlight.
Keep away from sources of electrical and magnetic interference.
Do not touch electronics/components; do not allow them to come
into contact with oil, paint, moisture, alkali or acids.
LSM 3.3 or higher is required to use the programming device.
The programming device is powered via a USB port. It is not
permitted to supply power in any other way.
The user must not modify the product in any way.
SmartCD.MP (SI.SmartCD)
EN