CarlStahl X-LED-PS-6-ES Betriebsanleitung Seite 16

X-LED-Power Supply
Operating devices for X-LED-LINE
6.1
I
NSTALLATION AND
Voltage supply: 17-22V
Fuse 2A for internal components
and auxiliary voltage.
DMX - Output Channel 1
First address in Line = 1
DMX - Output Channel 2
First address in Line = 169
DMX - Output Channel 3
First address in Line = 337
Please note:
The dip switch address setting does not correspond to the actual address of the first receiver, it is only used for
the internal generation of an address signal.
The first recipient address in the string associated with the channel, corresponds to set value address +2.
DMX-Line/Lead connection: Allowable conducters AWG 16-26 / 8-9mm Stripping depth.
AD0 - ON: Internal address generation on/off
All DMX-Channels are protected with a 10A fuse and is supplied with a control LED.
www.x-led.de
16
C
OMMISSIONING (DMX-SPLITTER)
DMX-Splitter Description / Functionality
// +49 7162- 948150-300 // x-led@carlstahl-arc.com
Auxiliary voltage 5V/1A
With fuse and control LED
DMX-Output signal
For transmi ng DMX-Input signal.
Without adress wire.
DMX-Input signal
Transmi ng DMX signal to all outputs.
Without adress wire.