Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
I
I
NSTALLATION
NSTRUCTIONS
1.)
Remove the device from the shipping box and check for completeness and possible damage.
2.)
Loosen the screws on the housing and remove the cover.
3.)
Connect the power cable to the intended position on the terminal block.
X-LED-PS6-
Cover fixing screws: M5 (max. 4 Nm tightening torque)
Other screws: M4 (max. 2 Nm tightening torque)
wall mounting
connectors on top
4.)
Connect fi xture line, data line and power line according to installation instructions. Check your connections and close the cover using
the screws provided (max. torque 4 Nm). Device must be used with closed cover only.
X-LED-PS6-
NOTE: Device must only be mounted in the positions as indicated.
wall mounting
connectors on bottom
x-led@carlstahl-arc.com // +49 7162- 948150-300 //
X-LED-Power supply
Operating devices for X-LED-LINE
X-LED-PS9-
fl at position
X-LED-PS9-
www.x-led.de
15
Werbung
Inhaltsverzeichnis
