Troubleshooting; Safety Instructions - Canyon Smart coach SB75 Kurzanleitung

EN

troublEShootiNG

Problem Solution
Connect your watch via USB
Your smart
connector to a USB port or a
coach doesn't
socket adapter and wait for
turn on
a few
Make sure that Bluetooth and
Your smart
GPS high accuracy are active
coach isn't
on your smartphone. Make
detected by a
sure the watch is not con-
smartphone
nected to another smartphone.
Your smart
Turn the smart coach off and
coach is
then turn it back on. Turn off
detected by a
and then turn on Bluetooth
smartphone,
on your phone. Reboot your
but fails to
phone.
connect
(Android only) Make sure that
The smartwatch
the smartwatch is connected
is connected,
to the smartphone via the
but many of the
Canyon Life app only, and not
functions are
paired via Android Bluetooth
not working.
setting.
The You must give a permission
smartphone for the application to run in the
constantly dis- background on your phone.
connects from Read the detailed instructions
the app. on the official Canyon website.
After the
Make sure your smartphone
completion
is connected to the Internet;
of the ECG
the watch is connected to the
measurement,
smartphone via the Canyon
the diagnostic
Life application, registration /
decoding is
authorization is performed in
missing in the
the application
application.
If the actions from above-mentioned list do not help,
please contact support service at Canyon web-site:
http://support.canyon.eu/

SafEty iNStruCtioNS

Read and follow all instructions before
usage of this device.
1. Protect the device from excessive amount of water:
this smartwatch is protected only from small amounts
of water such as rain drops or short spills. It's forbid-
den to put it under powerful jets of water, fully immerse
it, or to wear it while swimming.
2. Protect the device from heat: do not place heating
devices near it, and do not expose to direct sunlight
EN