Mobilex BISON Montage- Und Gebrauchsanleitung Seite 15

Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Product details
Forearm support
Position locking knob for
forearm support width
Support column
Position locking knob for
support column
Parking
pedal brake
After assembly or adjustments and before usage make sure, that all locking knobs and levers are securely
locked, so that the device is stable and solid. Assure there are no unintended movements. Failure to follow
this warning can result in personal injury.
Adjusting the height of forearm supports
•
Loosen 2 position locking knobs located on support columns;
•
Unlock the red height adjustment lever by pulling it up,
•
Make adjustment to your desired height by pushing the forearm supports down or letting them to move up
freely.
•
Release the red height adjustment lever
•
Tighten the 2 locking knobs.
Correctly adjusted forearm supports should be located on the height of user's elbows when standing with arms
directed downwards.
The device should only be used with the 2 locking knobs tightened
Adjusting the width of forearm supports
Loosen the 2 position locking knobs located under the forearm supports;
Make adjustment of the supports to your desired width by sliding them outwards or inwards;
Tighten the 2 locking knobs.
Adjusting length and angle of the push handles
•
Release the 2 position locking levers located under the push handles.
•
Make the adjustment to your desired length and angle, to make it easy and comfortable to grab the handles.
•
Tighten the levers.
Using the hand brakes
•
TO STOP THE WALKER simply pull the brake handles rearwards towards the hand grips.
•
TO REMAIN STATIONARY hold the brake handles in the "REAR" position.
•
TO START MOVING release the brake handles. They will move to the front automatically and the brakes will
be released.
Rev. 20.04.21 15 - 24
Push handle
With brake lever
Height adjustment
release lever
Position locking lever
for push handle
Height adjustment
Gas spring
Turning wheel
UM-313300-MULTI_19042021.odt