Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Danger!
When using equipment, a few safety precautions must be
observed to avoid injuries and damage. Please read the
complete operating manual with due care. Keep this man-
ual in a safe place, so that the information is available at
all times. If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the
safety information.
SAFETY REGULATIONS
Danger!
Read all safety regulations and instructions. Any errors
made in following the safety regulations and instructions
may result in an electric shock, fire and/or serious inju-
ry. Keep all safety regulations and instructions in a safe
place for future use.
PROPER USE
The drill is designed for drilling holes into wood, iron,
non-ferrous metals and rock using the appropriate bits.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Power, W ........................................................................ 1100
Voltage, V .........................................................................230
Frequency, Hz ....................................................................50
No load speed, min
................................................ 0-2600
-1
Chuck size, mm ..................................................................13
SOUND AND VIBRATION
Sound and vibration values were measured in accordance
with EN 60745.
L
sound pressure level ..................................97,5 dB(A)
pA
K
uncertainty ............................................................... 3 dB
pA
L
sound power level ....................................108,5 dB(A)
WA
K
uncertainty .............................................................. 3 dB
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing. Total
vibration values (vector sum of three directions) deter-
mined in accordance with EN 60745.
Hammer drilling in concrete (handle)
Vibration emission value a
h
K uncertainty = 1.5 m/s
2
Hammer drilling in concrete (additional handle)
Vibration emission value a
h
K uncertainty = 1.5 m/s
2
Drilling in metal (handle)
Vibration emission value a
h
K uncertainty = 1.5 m/s
2
Drilling in metal (additional handle)
Vibration emission value a
h
K uncertainty = 1.5 m/s
2
The specified vibration value was established in accor-
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specified value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial as-
sessment of a harmful effect.
Keep the noise emissions and
vibrations to a minimum
▶ Only use appliances which are in perfect working order.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
▶ Switch the appliance off when it is not in use.
▶ Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in accor-
dance with instructions, certain residual risks
cannot be rules out. The following hazards may
arise in connection with the equipment's construc-
tion and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or is
not properly guided and maintained.
= 13.192 m/s
2
= 10.910 m/s
2
= 4.503 m/s
2
= 5.372 m/s
2
Impact drill | 7
Werbung
Inhaltsverzeichnis
