Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wheel mounting
Assemble the two wheels by attaching a Ø 26/44 washer on each side of the wheel
hub and secure with splits.
Mounting of draw bar
Place the draw bar under the frame in the bracket and secure by means of the two
square brackets.
Istallation of water tank
Position the 5 spacers on the frame and then the galvanized metal plate ( the tank
valve opening must face rearward). Secure with 5 M10-60 screws.
Fasten the water tank with the two straps, that are secured and locked with buckles
and their threaded rods.
Before filling, it is important to ensure that the tank is secured correctly to the frame
and that the valve is tight to minimize the risk of leakage.
We reserve the right to change the technical parameters and specifications of this product without prior notice.
3
MAN 9061205 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: 70212626
DK-6600 Vejen
e-mail: salg@p-lindberg.dk
Werbung
