Velleman VTHD0051 Bedienungsanleitung Seite 8

Sanding Accessories
•
Good for sanding, grinding and polishing
Sanding discs can be used for nearly any small sanding job, from model making to fine
furniture finishing. The drum sander is a tiny drum which makes it possible to shape
wood, smooth fiberglass, sand inside curves and other difficult places. Replace the
sanding bands on the drum as they become worn and lose their grit sandpaper discs.
Grind and polish flat or contoured surfaces. They are used most effectively as a finishing
sander after heavier surface sanding and material removal. They come in fine and
coarse grades.
Dressing Stone
•
Good for reshaping bits
Ideal for reshaping HSS drill bits for specific applications. Bring new life back to worn
HSS drill bits' tip edge and angle. Save money by getting the most out of your HSS drill
bits.
6.2 Use
Sanding and Cutting Mandrel
This mandrel has a small set screw at its tip and is used with cutting wheels and
sanding discs. Higher speeds, usually maximum, are best when using these types of
accessories.
Drum Sander
To replace a band on the drum sander, loosen the screw without removing it to contract
the drum. Slide the old band off and slide the new band on. Expand the drum to tighten
the band by turning the screw again.
V. 01 – 10/06/2021
VTHD0051
8 ©Velleman nv