Using Note Manager - AIPTEK MyNote Bluetooth Handbuch

MyNote Bluetooth Manual
Using Note Manager (Windows only)
1. Uploading your Mobile Notes (USB)
2. Uploading your Mobile Notes (Bluetooth)
If assistant ask you to select a Bluetooth Service Selection
please activate SPP DEV and finish the assistant.
To pair both devices please click the mobile pen SSP Dev
icon which is in your Bluetooth device list now.
Open the Note Manager software by clicking on
the desktop icon. The Note Manager application will detect your unit and will prompt you to upload
your notes. Select "Yes" to start transferring notes.
Open the Note
the desktop icon.
Now simply connect your base unit to your USB port. Select
'Note Mode' as the application mode and confirm 'OK'.
The Note Manager application will detect your unit and will
prompt you to upload your notes. Select "Yes" to start
transferring your notes. Or, simply click the "upload"
Start the Bluetooth Environment by clicking the icon on your
desktop. Make sure the Bluetooth of your PC and MyNote
Bluetooth is turned on. Click on "Add Bluetooth device" and simply
follow the assistant. After searching the assistant should find
"mobile pen" or "MyNote Bluetooth". Select this device and
use 0000 as passphrase.
www.aiptek.eu
Manager software by clicking on
EN
icon.
Page 8