ZEALUM ZUSC5
Congratulations!
and thank you for choosing this Zealum product!
With the Zealum ZUSC5 you have purchased an innovative and professional
product, which will enable you to enjoy your music on a very high quality level for many
years.
Please read the warranty specifications at the end of this manual carefully, to avoid unneces-
sary trouble and defects. In case of trouble, please contact your local dealer or the distributor
of your respective territory.
POTENTIAL APPLICATIONS OF THE ZEALUM
ZUSC5 DEVICE
New cars that come with an OEM installed radio, or a GPS navigation system create serious
obstacles for aftermarket installation of car audio gear, because there are no RCA line outs
and in addition, the headunit can not be changed against an aftermarket unit in some cases.
In such cases it's almost impossible to install an amplifier or other multimedia devices, that
depend on an RCA input signal to function. The Zealum ZUSC5 can cover different functions
in a car audio sound system as follows:
High / Low adapter function
■
The ZUSC5 converts the ISO speaker output signal into the following RCA line–out signal:
4
Front (L & R)
This enables the use of amplifiers, DSP, etc. with a headunit that has no RCA line outputs.
4–CH to 6–CH adapter function
■
The incoming 4–channel signal is buffered and split up into the following 6–channel RCA out-
put signals:
Front (L & R)
4
4-CH balanced line driver function
■
This option provides amplification of the headunits RCA line–out signal, to drive 4V inputs of
amplifiers with radios that have low RCA line-out levels. Signal to noise ratio is significantly
improved in such cases. Balanced inputs and low impedance outputs provide improved
immunity to noise from electrical interference.
BOX CONTENTS
■
Zealum ZUSC5
■
Mounting accessories
■
Manual
4
Rear (L & R)
Rear (L & R)
4
4
Subwoofer & Center
Subwoofer & Center
4
2