2. Montage und Anschluss 2.1. Montage nicht 2.2. Potentialausgleich ...
Seite 8
2.3. HF-Anschluss 2.3.1. Eingänge des Senders Messbuchsen ...
Seite 9
2.3.2. Ausgänge der Empfänger ORX 15-00 Ausgänge ORX 14-00 Teilnehmeranschlüsse ...
Seite 10
ORX 14-01 Teilnehmeranschlüsse 2.4. Optischer Anschluss Es darf keine direkte optische Verbindung zwischen Sender und Empfänger hergestellt werden. Steckverbindung herstellen oder lösen ...
Seite 11
2.5. Stromversorgung 2.5.1. OTX 51-00 2.5.2. ORX 14-00 und 15-00 Hinweis: 2.5.3. ORX 14-01...
Seite 30
ORX 14-01 subscriber ports 2.4. Optical installation No direct optical connection may be established between the transmitter and receiver. Connecting or disconnecting the plug connection ...
Seite 31
2.5. Power supply 2.5.1. OTX 51-00 2.5.2. ORX 14-00 and 15-00 Note: 2.5.3. ORX 14-01...
Seite 32
3. Planning an optical installation 3.1. Dimensioning -8 dBm -14 dBm ∂ ∂ 3.2. Input signals of the optical transmitter 3.2.1. SAT input signal level 3.2.2. SAT flatness 3.2.3. Cascading several OTX 51-00 3.2.4. TERR (DVB-T/-T2/-C) ≤ ∂ ∂ 3.2.5. TERR (FM/DAB)
Seite 33
3.3. Output levels of the optical receivers 3.3.1. ORX 14-00 SAT output level Terrestrial output level (DVB-T/-T2/-C) 3.3.2. ORX 14-01 SAT output level (SCR/CSS) ∂ Terrestrial output level (DVB-T/-T2/-C) 3.3.3. ORX 15-00 SAT output level (typical) ∂ ∂ Terrestrial output level (DVB-T/-T2/-C) μ...
Seite 34
3.4. Installation examples 3.4.1. Optical distribution to several ORX...