All manuals and user guides at all-guides.com
1.2. Range of applications
The DC/DC converter is an additional circuit
board for all Behnke door intercom devices. The
DC/DC converter enables conversion of 9-36 V
DC entry feeds to 12 V DC output. It also ensures
a Galvanic isolation between Behnke door inter-
com and other devices (important when using
an external power supply with earthing). Using
a DC/DC converter increases the operational
safety for your Behnke door intercom devices
by separating the external potential from the
potential of the telephone line.
1.3. Technical Specifications
DC/DC converter for installation with a Behnke
door intercom
▸
Entry feed 9-36 V=
▸
Output 12 V=
▸
Galvanic isolation
DC/DC converter to be installed on the
top-hat rail
▸
Entry feed 9-36 V=
Positive: Clamp 9 or 10
Negative: Clamp 7 or 8
▸
Output 12 V=
Positive: Clamp 3
Negative: Clamp 2
▸
Galvanic isolation
When operating properly, a green LED will light
up on both the entry and the output side.
www.behnke-online.com
Instructions for DC / DC converter
Introduction
GB
15