Parker SCPSi Kurzanleitung Seite 17

Intended use
The pressure sensor is intended for pressure measurement within the
permitted ranges (see "Technical data" on page 24).
Any further use of the pressure sensor is not permitted, and may
result in accidents or destruction of the pressure sensor. Such use
will immediately void any warranty and guarantee claims against the
manufacturer.
Misuse
The pressure sensor does not conform to directive 2014/34/EU, and
therefore may not be used in explosion hazard areas.
Technicians
This quick-start guide is designed for trained technicians who are fa-
miliar with applicable provisions and standards within the usage area.
Technicians involved in commissioning and operating the device must
have appropriate qualifications. Qualifications may be obtained through
training or relevant instruction.
Technicians must be familiar with the contents of the quick-start guide,
and the guide must be available to them at all times.
17
V1.0/01/21