Installment And Dismantlement; Operation - B.A. International 10 BASES10 Gebrauchsanweisung

3.5 Dimensions: Φ25mm×252mm
3.6 Net weight: 152g
3.7 Consumption power: ≤8W
3.8 Protection type against electrical shock: class Ⅱ
3.9 Protection against electrical shock: type B
3.10 Protection against harmful ingress of water or particular matter:
ordinary equipment (IPX0)
3.11 Safety in the presence of flammable anesthetic mixture with air,
oxygen or nitrous oxide: not suitable under this condition.

4 Installment and dismantlement

4.1 Take off the red cap from the optical fiber and then insert the metal
part into the front of the BA Optima 10, make sure to screw the fiber to
the end.
4.2 Install the light hood on the top of the optical fiber.
4.3 For dismantlement, follow the instruction of installment above in
reverse.
4.4 When finishing using or when the battery needs to be charged, plug
the output port of the adapter into the charge port, than connect the
adapter to the power supply. After that, place the device into the socket
on the charger.

5 Operation

5.1 Lightly press the mode key. Following three modes are available.
3