Inspection And Maintenance; Packaging - B.A. International 10 BASES10 Gebrauchsanweisung

2. It can also be dried directly in a medical drying cabinet (or oven). The
recommended drying temperature is 80℃~120℃ and the time should be
15~40 minutes.
Notes
a) The drying of product must be performed in a clean place.
b) The drying temperature should not exceed 138 °C;
c) The equipment used should be inspected and maintained regularly.

6.6 Inspection and maintenance

In this chapter, we only check the appearance of the product. After
inspection, if there is no problem, the optical fiber can only be used.
6.6.1 Check the product. If there is still visible stain on the product after
cleaning/disinfection, the entire cleaning/disinfection process must be
repeated.
6.6.2 Check the product. If it is obviously damaged, smashed, detached,
corroded or bent, it must be scrapped and not allowed to continue to be
used.
6.6.3 Check the product. If the accessories are found to be damaged,
please replace it before use. And the new accessories for replacement
must be cleaned, disinfected and dried.
6.6.4 If the service time (number of times) of the product reaches the
specified service life (number of times), please replace it in time.

6.7 Packaging

Install the disinfected and dried product and quickly package it in a
medical sterilization bag (or special holder, sterile box).
11