be cool BCRS2102F Bedienungsanleitung Seite 27

This function distributes the discharged air to the left and right. This way you achieve
UVB steriliser

Use the
the UVB sterilisation function of the unit, the respective indicator lights up.

As soon as you activate the UVB-button, the speed of the fan changes automatically
to the lowest fan level until you deactivate the function.

Press the button again to deactivate the function.
This function disinfects the drawn-in air inside the unit and cleans it for discharge
The UVB-lamp switches off automatically after 8 hours, unless you switch it off
Ozone cleaning
ATTENTION PLEASE OBSERVE THE WARNINGS ON OZONE VERY CAREFULLY!
1. While the unit is switched on, press the
"OZONE" button on the unit for 3 seconds to start ozone purification.
2. After pressing once, a duration of 15 minutes is set as standard. Each subsequent
press of the button increases the cleaning time with ozone by another 15 minutes. The
maximum cleaning time is 120 minutes.
a. (EXAMPLE: 15 min. - 30 min. - 45 min. - 60 min. - 75 min. - 90 min. - 105
min. - 120 min.)
3. As soon as you activate the OZON-button, the speed of the fan changes automatically
to the lowest fan level.
4. Choose the ideal cleaning time with ozone depending on the room size:
5. To deactivate the cleaning function with ozone, press the
you reach 120 min. and then press it again.
(EXAMPLE: 15 min - 30 min - 45 min - 60 min - 75 min - 90 min - 105 min - 120 min

OFF)
a horizontal air distribution in the room.
- button on the remote control
from the unit.
Room area Recommended treatment time
7,5 m²
15 m²
22,5 m²
30 m²
37,5 m²
45 m²
52,5 m²
60 m²
Seite 27 von 33
NOTE
or the "UVB" button on the unit to activate
NOTE
NOTE
earlier.
- button on the remote control or the
15 minutes
30 minutes
45 minutes
60 minutes
75 minutes
90 minutes
105 minutes
120 minutes
- button repeatedly until