Direct Connection To Your Ipad; Wifi Connection - EuroLite freeDMX AP Bedienungsanleitung

Direct connection to your iPad

The easiest and fasted way to control the DMX fixtures
connected through your iPad, is the AP mode (access
point). This mode directly connects your iPad to the
freeDMX AP and uses it as wireless access point.
The AP mode must be active (ACCESS POINT
1
indicator is flashing).
Switch on the WiFi function on your iPad.
2
freeDMX_AP_xxxxxx
Connect the iPad to the freeDMX AP. As a basic setting,
3
the network is not password-protected, so there will be
no password prompt.
Note: xxxxxx represents the last 6 digits of the SSID.
Each unit has a digit sequence of its own. It is possible
to change the device name using the web setup page.
Once the ACCESS POINT indicator
4
the devices have been paired.
You can now control your light effects through the
5
Light'J app on your iPad.
lights permanently,

WiFi connection

If you connect the freeDMX AP as a client to your WiFi
network, you can stay on your router's network while
working with Light'J.
First, connect your iPad directly to the freeDMX AP as
1
described before.
Then open a web browser and enter the IP address of
2
the freeDMX AP: http://192.168.4.1. The setup page
will appear:
WiFi 1
WiFi 2
my WiFi
Go to the "Network" tab and select the network into
3
which you want the freeDMX AP to connect to.
English 17