Vortice VORT HR 450 Avel D Betriebsanleitung Seite 43

ENGLISH
User functions (password 013)
The user menu offers the following options: (for which you can select "YES/NO").
Alarm
This option allows you to manage all possible alarm messages. Multiple errors must be managed one by one, starting from
the first one that occurred. In these situations, an intermittent "Alarm!" signal will be emitted on the home screen or
intermittent messages "Alarm!", "Block!" and "OFF" will be displayed in the event of locking errors.
In all cases, you can switch on the ALARM menu to view the necessary actions and reset errors. The various situations
that generate alarm signals are described below.
Filters
When the pre-set time period has elapsed, a pre-alarm is displayed and a filter check/cleaning is required, if the filters are
replaced during the pre-alarm, the counter must be reset by accessing the specific function in the installer menu.
MAIN MENU
ALARM
SETUP
INFO
When the pre-set time period has elapsed, an alarm is displayed and filter replacement is required. To replace the filters
(see "Maintenance and Cleaning"), after replacing them it will be possible to reset the error and the counter.
MAIN MENU
USE MENU
ALARM
SETUP
HOLIDAY
- YES: the fans operate at a speed of 30% below
minimum.
ACT PROG
- Enable weekly programming
CHECK OR
CLEAR
FILTER
REPLACE
FILTER.
RESET?
ALARM
ALARM
YES
43