Technical Characteristics - Nordelettronica NE325 25A Bedienungsanleitung

GB
BATTERY

TECHNICAL CHARACTERISTICS:

Input:
Voltage output:
Maximum current output:
Connected battery capacity:
Charging algorithms settable:
Fan:
Mains/status signal:
Compensation charge voltage with temperature battery:
Protection:
Weight:
CONNECTIONS:
Input/Output Battery:
Input NTC, D+, LIN:
PROTECTION:
Input:
Reverse polarity
Reverse polarity
Output:
Short circuit
Overloading
Output Over-Voltage
Over-Temperature battery charger
Over-Temperature battery
DC/DC NE325
DC/DC
CONVERTER
MOD. NE325
IN OUT
BATTERY
IN OUT
30A
4 3
2 1
S1
NEGATIVE
NE325 25A
11Vdc - 15Vdc
14,4 / 13,8Vdc
25A continuous
Compatible with the charging current of the battery charger
(check the battery charging characteristics)
4 algorithm
no
three colour led
yes (if plugged NTC sensor)
M5 screw, (use eyelet terminal d=5mm). It is advisable to make short
connections (1 - 3 mt) towards the battery, with minimum 10mm2 wires
Connector 4-way MOLEX MINI-FIT JR female with male terminal
(use MOLEX MINI-FIT JR male with female terminal)
pin.1 - pin.2 Input sensor NTC 10K@25 B3977
pin.3 Input signal D+ (12V) - Enable dc/dc
pin.4
Lin-Bus Communication
yes (with 30A fuse on the negative)
yes (with 30A fuse on the negative)
yes (if plugged NTC sensor)
3
DIP-SWITCH
S2
VISUAL SIGNAL
NE325 40A
40A continuous
yes
IP20
1,3Kg
yes
yes
yes
yes
GB