Specifications - Eufab 16408 Bedienungsanleitung

Bicycle wall mount
CONTENTS
1. PROPER USE OF THE PRODUCT ___________________________ 3
2. SCOPE OF DELIVERY __________________________________ 3
3. PECIFICATIONS _____________________________________ 3
4. SAFETY PRECAUTIONS ________________________________ 3
5. OPERATING INSTRUCTIONS _____________________________ 3
6. MAINTENANCE AND CARE ______________________________ 3
7. NOTES REGARDING ENVIRONMENTAL PROTECTION _______________ 3
8. CONTACT INFORMATION _______________________________ 3
WARNING
Read the operating instructions through carefully prior to
initial use and observe all of the safety notes!
Store the original packaging, the receipt and these
instructions so that they may be consulted at a later date!
Not observing such may lead to personal injury, damages to
the device or your property!
Prior to initial use check the contents of the packaging to
ensure that they are in perfect condition and complete!
1. PROPER USE OF THE PRODUCT
The bicycle wall mount is a bracket designed for mounting a bicycle to the wall.
When not in use, the frame holder can be folded down to save space.
2. SCOPE OF DELIVERY
Parts list
Item 1 Bicycle frame holder
Item 2 Adjustment skid
Item 3 Splint 3 Ø mm
Item 4 Fastening bolt
Item 5 Vertical rail
Item 6 Cross-headed screw 4 x 30 6x
Item 7 Dowels
Item 8 Wheel rail
Item 9 Countersunk screw M5 x 12 2x
Item 10 Screw M5 x 8
Item 11 Nut M5

3. SPECIFICATIONS

Maximum payload: 25 kg
Weight: Approximately 2 kg
Length of wheel rail: Approximately 1.50 m
Length of frame holder: Approximately 30-37 cm
Height of wall mount: Approximately 0.96 m
4. SAFETY PRECAUTIONS
• Keep children away and do not permit children to use this device!
• Only use this product for the intended use!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories or replacement parts
specifi ed in the instructions or that the manufacturer has
recommended!
5.OPERATING INSTRUCTIONS
• Connect the two wheel rails (item 8) using the vertical rail (item 5) by putting the
screws M5 x 8 (item10) through the front and lower drilled holes and securing with
the nuts M5 (item 11). Use the countersunk screws M5 x 12 (item 9) and the nuts
M5 (item 11) through the rear drilled holes to secure.
• Align the bicycle wall mount in such a way that the wheel rails are horizontal and
the vertical rail is vertical. Secure the bicycle holder with the dowels (item 7) and
the cross-headed screws 4 x 30 (item 6) to a suitable place on the wall.
• Caution: Do not damage any cables in the wall when drilling holes for the dowels.
• Insert the adjustment skid (item 2) from above into the vertical rail, in doing so, the
slot for the fastening bolt (item 4) must be on the right side.
• Adjust the adjustment skid to a suitable height for your bicycle and insert the
fastening bolt through both metal plates of the vertical rail and through the slot
of the vertical skid.
1x
1x
1x
1x
1x
6x
2x
4x
6x
• Push the fastening bolt down. The adjustable skid is now secured.
• Insert the bicycle frame holder (item 1) into the adjustable skid and secure with
the splint (item 3).
• Fold the frame holder down.
• Place the bicycle with the wheels in the wheel rails, the pedal close to the wall must
point upwards.
• Place the bicycle frame holder over the frame. The bicycle is now secured
6. MAINTENANCE AND CARE
Only clean the bicycle wall mount with a soft cloth and do not use any aggressive
cleaning agents or solvents.
Check the screws of the wall mount to ensure that they are fi rmly seated.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of this device via the recycling facilities or public/com-
munity collection points.
The materials can be recycled. By recycling, reuse of materials or
other forms of reuse of old devices, you make an important cont-
ribution to the protection of our environment!
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
3