Technical Specifications; Safety And Warning; Correct Disposal - Mäusbacher 0546 180-90 P1 Montageanleitung

ENGLISH

TECHNICAL SPECIFICATIONS

1. Electric Components:
Input Voltage:
Output Voltage:
Duty cycle:

SAFETY AND WARNING!

This product can be used by children age 8 years and older, a persons with reduced physical, sensory or mental capacity as
long as they have been given proper instructions / training on how to use the product in a safe way and understand the haz-
ards involved. Children shall not play with the product.

CORRECT DISPOSAL

This sign indicates that this product must not be disposed through regular household waste within the European
Union. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. There you can obtain all
information necessary to dispose of this product properly. (WEEE-Reg.-Nr. DE: 52242201)
HANDSET
1. Up / Down Keys
To adjust the height of the desk, keep pressing the "UP"
or "DOWN" key until the tabletop reaches the desired position.
2. Display Screen
Display the height value of the desk.
3. Memory Key (1 / 2 / 3)
After setting memory keys, the desk will move automatically to the saved position.
How to set a memory key: Please select the desired position. Then press the S-Key, the display will show a "S"-Sign.Then
press the desired Button from 1 to 4 to assign the current height to a number on the control panel. Whenever a pro-
grammed memory key is pressed, the tabletop will automatically adjust to the entered/saved height.
4. Set Key
The set key can be used to save the height of the table.
5. Anti-collision function
When the desktop encounters reverse resistance while moving, the desk will stop and move slightly in the opposite direc-
tion.
6. Keypad Lock
To lock: Press and hold "UP" and "DOWN" buttons for 5 seconds until "LOC" sign appears on the display, indicating that the
system is locked.
To unlock: Press the "UP" and "DOWN" buttons for 5 seconds at the same time until the "LOC" sign disappears and the
height of the desk is displayed, indicating that the system is ready to be adjusted again.
7. Reset
When the system is experiencing a problem or the control panel displays "RES", the system must be reset. Press and hold
the "DOWN" button throughout the process. After 5 seconds, the desk will lower slightly until it reaches its lowest height,
then rises slightly and the display changes back to the numeric height setting. After the desk stops, the reset process is
successfully completed.
12
100-240V AC
29V DC
10% max 2min on 18 min off
Automatic power off,
low energy consumption
2. Desk Frame
Anti-Collission
Built-in load limit switch
Maximum load: 120 KG (including tabletop weight)
Speed: 30 mm/s (2M2S TQD)
38 mm/s (2M3S TQD)
Minimum height: 700 mm (2M2S TQD)
600 mm (2M3S TQD)
Travel-Distance: 480 mm (2M2S TQD)
650 mm (2M3S TQD)
5 years
warranty