System Settings - Braun B-Box T4 Bedienungsanleitung

being deleted. Mandatory saving method: during the first 10 seconds of the current video, press the MENU button to
force save the current and the previous segment; during 10 seconds back counted of the video, press the MENU
button to force save the current and the next segment; in the current video between the first 10 seconds and the last
10 seconds, press the MENU button to force save the current file.
8. G_SENSOR function
In video recording mode, if the car brakes suddenly or there is an impact, the accelerometer force saves the
current file in order to prevent important information from being deleted. The sensitivity can be set as high,
medium or low. The filing is similar to the SOS G_SENSOR filing method.
9. Motion detection
In video standby mode, press the DOWN button when moving objects are detected, the video starts recording. If
within 5 seconds no moving object enters the motion detection area, the function deactivates.
D.

System settings

In standby mode, press the MENU button to enter the Settings menu. Press the UP/DOWN button to select and
press the REC button to confirm. After setting up the parameters, press the REC button. Press the MENU button to
exit the Settings menu. The layout of the Settings menu is as follows:
Mode
Resolution
Video
Cycle Recording
Exposure
Compensation
Motion Detection
Video & Audio
Date Label
REC Mode
Photo
Resolution
Menu
1080FHD 1920x1080
1080p 1440x1080
720p 1280x720
WVGA 848x480
VGA 640x480
Off/30 seconds/1 min/2mins
+2.0>, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Off/On
Off/On
Off/On
Single shooting / 2 second timer / 5 second
timer / 10 seconds timer
12M 4032*3024 / 10M 3648*2736
8M 3264*2448/ 5M 2592*1944
3M 2048*1536 / 2M 1920*1080
VGA 640*480 / 1.3M 1280*960
Select Settings
4
Remark
Resolution: 1080FHD is 25fps,
others are 30fps
Can set the time
The greater the number of
pixels, the larger the file