Product Features; Operation - Braun B-Box T4 Bedienungsanleitung

B.

Product features

1. Supports 1080p, 720p, 480p and a variety of video formats, superior image effects
2. Built-in microphone/speaker
3. Quick recording
4. Quick screensaver
5. Supports high capacity TF card
6. Charge during video recording, video loop, seamless video
7. Idling engine starts automatic boot video function, time-lapse video automatic shut down after 5 seconds
8. Motion detection
9. SOS and G_SENSOR file forced preserving evidence, not to be deleted
C.

Operation

1. Switching on and off:
A) Press the ON/OFF button, the DVR automatically enters video mode and starts recording, the green LED flashes.
If connected to the car charger, the DVR automatically enters video mode and starts recording, when the engine
is started. It automatically switches off and saves the video file 5 seconds after the engine is stopped.
If no TF card is inserted the LCD displays "no card". Insert a TF card after switching the device off.
B) Press and hold the ON/OFF button to turn the DVR off.
If the battery capacity is insufficient, the DVR will automatically switch off and save the video file.
2. Charging the battery
You can charge the battery in two ways:
1) Use the USB charger for charging.
2) Use the car charger.
During charging the red LED lights up; it extinguishes as soon as the battery is fully charged.
3. Inserting a memory card
Insert a TF card according to the arrows until you hear a confirmation sound.
4. Recording a video
Press ON/OFF to immediately record videos, the green LED flashes. Press the REC button to stop recording and
save the file; the DVR enters standby mode. Press the REC button to start recording, press the button again to
stop recording. Press the MODE button to mute the sound and only record the pictures in video mode. Press the
UP button to switch the LCD on/off to save power.
5. Taking pictures
Press the MODE button to enter photo mode, press the REC button to take a photo. Press the UP button to turn
night vision on/off.
6. Playback and delete
In standby mode, press the MODE button to enter the playback mode. Press the UP/DOWN button to select
preview, press the REC button to play or stop the file. Too delete the file, press the MENU button to enter the
Delete menu, press the button again to select the option "Delete current" or "Delete all". Press the REC button to
confirm and press the MENU button to exit the Delete menu to return to playback mode.
7. SOS function
In video recording mode, press the MENU button to force save the file in order to prevent important information
3