Maintenance - BWT KVD-613 Installations- Und Bedienungsanleitungen

C. Maintenance
1. There should always be so much salt in
the tank that you cannot see the water.
The brine tank, however, has to be
emptied and clea- ned once or twice a
year (dependent on the salt qua- lity).
2. It is important that you do not drop salt
into the re- servoir with the brine valve
during salt refilling. Always see to it that
the cover is intact.
3. ALWAYS USE BWT SALT TABLETS.
4. The valves of the in- and outlet sides
must be open. The bypass valve must be
closed (if fitted).
5. At regular intervals you must draw a sample of the water in order to check that
the filter supplies soft water. If the soft water is used as pre-treatment ahead of
the RO system, the water must be clecked daily.
6. If there are irregularities with the filter operation:
Contact BWT Denmark at kundeservice@bwt.dk for service.
18
EN