Start Recording; Picture Settings - Prestigio Roadrunner 300i Schnellstartanleitung

Quick Start Guide
Prestigio RoadRunner
Getting started

Start recording

1. Insert a micro SD card (not included).
2. Connect the device to the car charger. When the car engine
starts, the device will begin loop recording.
Taking photos
• Press [ /MODE] to select the picture mode, and then
press [OK] to take photos.
Settings
In preview mode, press [MENU] to enter settings. Use [ ]/[ ]
to navigate the menu.
Video settings
• Resolution: Select the resolution of recorded video: 720P,
VGA.
• Loop recording: Set the video duration for loop recording.
When the micro SD card is full, the device will delete the
first unlocked video file automatically.
• Motion detection: Turn on or off motion detection. If there
is any motion detected while the car engine is stopped,
your car DVR will start recording automatically.
PCDVRR300I QSG v1.5_Book.indb 1

Picture settings

• Size: Select the picture image size from 1.3M, VGA.
General settings
In preview mode, double press [MENU] to enter general
settings.
Playback and media connection
Playback mode
In preview mode, press [ /MODE] to select playback mode.
1. Press [ ]/[ ] to scroll through the files.
2. Press [OK] to start playback.
3. Press [ /MODE] again to exit playback mode.
Note:
While viewing the file list, you can press [MENU] to select to:
• Delete one file or all the files.
• Protect or unprotect the selected file.
5/13/2015 4:31:16 PM