Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
There is no regular maintenance required of the PSU as the microcontroller performs regular health checks of the battery and output voltage.
However, reference should be made to the battery manufacturer's documentation to determine typical / expected battery life with a
view to periodic replacement of the battery.
If the output of the PSU fails the cause of the failure should be investigated e.g. short circuit load, connection of a deeply discharged battery. The
fault should be rectified before restoring power to the PSU. The following fuses may need to be replaced. Ensure the correct fuse rating and type
is used.
Load Output Fuse
T2A 20mm, 250Vac glass
Internal Mains Fuse
T3.15A 20mm, 250Vac HBC
Battery Fuse
T2A 20mm, 250Vac glass
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the battery manufacturer's instructions
Specifications subject to change without notice.
www.acornfiresecurity.com
CAUTION
and all local and national regulations
The packaging supplied with this product may be recycled.
Please dispose of packaging accordingly.
www.acornfiresecurity.com
© 2013 Elmdene International Ltd
Werbung
Inhaltsverzeichnis
