Safety Information - Berbel ConInterface Montageanleitung

Safety information

1. Safety information
1.1 Proper intended use
The device serves to integrate the
hood functions in a data network and
to pass on information between the
extractor hood, remote control and other
integrated devices.
The device is suitable for the following
extractor hoods of the manufacturer:
y Headroom hoods BKH
y Island hoods BIH
y Wall hoods BWH
These instructions describe the
connection and attachment with the
extractor hood.
 Observe the extractor hood
instructions for any peculiarities when
installing the device.
Connection with a PC or other devices is
not permitted.
It is only permitted to use the device
when it is in technically flawless
condition and after correct installation.
Any other use shall be considered
improper use.
Reading and observing this manual are
also part of the proper use of the device.
34
1.2 Authorised target groups
Electrical work only to be undertaken by
qualified electricians per DIN VDE 0100.
Requirements on qualified electricians:
y Knowledge of the basics of electrics.
y Knowledge of country-specific
regulations and standards (e.g. in
Germany, DIN VDE 0100, part 701).
y Knowledge of the applicable safety
regulations.
y Knowledge of the relevant legal
requirements for gas installations
(e.g. in Germany the technical rules
for gas installations TRGI).
y Knowledge of this manual.
Installation and repair only by qualified
specialist personnel. Requirements on
qualified specialist personnel:
y Knowledge of the regulations on
safety at work.
y Knowledge of fastening systems.
y Basic knowledge of ventilation
systems.
y Experienced in using electrical and
mechanical tools.
y Ability to read technical drawings.
y Knowledge of this manual.
6005005_0 – 13.08.2020