FireBoard FBX2K Bedienungsanleitung Seite 6

Using the FireBoard Drive System
EN
The FireBoard 2 Drive has the FireBoard Drive Control System built in. Fireboard Drive Control System
is designed to control most 12V fans. Fans are most effective when a stable fire has been established
and vents are adjusted accordingly. Every smoker is different: learning how to achieve a steady
temperature by controlling your vents will make your fan more efficient.
Setup Your Fan
Your fan should be the primary source of air for
your fire. A secure and air-tight installation is best.
There are likely fans and adapters built for your
smoker to get the ideal fit - most 12V fans with
2.5mm plugs work with FireBoard 2 Drive.
Connect the Fan
Your fan will plug into the 2.5mm barrel plug. The
FireBoard's battery is fully capable of driving your
fan - for longer cooks, we recommend plugging in
your FireBoard unit.
3
Setup Your Cook in the FireBoard App
The Dashboard will now have the FireBoard
Drive controls. Select a channel you want to
TM
monitor the pit temperature ("Control Channel")
- you can use any of the available channels. The
app will display the current pit temperature once
a probe is plugged in. Press the "Setpoint" button
to enter the desired pit temperature. For best
results, start with a fairly stable pit temperature
and allow FireBoard Drive
fan speed or wait until the temperature falls below
the setpoint.
For more control and customization, use the
Programs tab. Programs give you the ability to
create their own step-by-step programs that lets
you change your setpoint over time. Learn more
about Programs at our Knowledge Base at
fireboard.io.
to slowly increase the
TM
docs.
Example of a Drive Program
The graph above shows a 3 Step Program.
Step 1 is to hold setpoint of 225˚F for 20 minutes.
Step 2 is to hold a setpoint at 325˚ until target temp
reaches 165˚.
Step 3 is to hold setpoint at 180˚, which is the default
hold step that is added at the end of programs.