Camera Setting - AKASO EK7000 Pro Bedienungsanleitung

EN
10. Burst Photo: 3P/s, 5P/s, 10P/s
Default setting is 3P/s. Burst captures up to 10 photos in 1 second, so it is perfect for
capturing fast-moving activities.
11. Time Lapse Interval: 0.5Sec, 1Sec, 2Sec, 5Sec, 10Sec, 30Sec, 60Sec
Default setting is Unlimited.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best one later.
12. Continuous Lapse: 3Sec/5Sec/10Sec/20Sec/30Sec/60Sec
Default setting is 3Sec.
This camera takes continuous lapse photo for 60 seconds at most.
13. Self-Timer: Off/On
Default setting is Off.
An automatic shooting mode that counts down and then takes a photo.

Camera Setting

1. Special Effect: Normal/Black and White/Negative/Retro/Red/Green/Blue
Default setting is Normal.
2. Power Frequency: 50Hz/60Hz/Auto
Default setting is Auto.
3. Language: English/简体中文/繁體中文/Italiano/Español/Português/Deutsch/
Dutch / Français / 日本語
Default setting is English.
4. Date & Time: 10/01/2018 00:23 MM/DD/YY
11