Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction Manual
for prod. code 115 9501
Assembly step 1
Fasten the side section
to the wall at the desired height with the drill hole distance of 700mm (see figure 3). Use
the supplied screws
und plastic dowels.
10
figure 3: bore dimensions wall mounting
Assembly step 2
Drill the basketball board according to the drilling plan shown in figure 4.
Figure 4: drilling plan basketball board
Assembly step 3
Now screw the basketball board
and the side section with the fixing material
(M10x70)
The cross brace is attached with the two lower screws
Version 10/2020 | page 7
Werbung
