Seite 1
Abbildung 1: Sport-Thieme Basketball-Übungsanlage „starr“ Produktbeschreibung Die Sport-Thieme Übungsanlage ist eine komplette Basketballanlage zur Wandmontage. Sie ist für den zweckgemäßen Gebrauch konstruiert und dementsprechend zu gebrauchen. Das Anhängen an den Basketballkorb ist eine Überbelastung des Gerätes und strengstens zu unterbinden.
Seite 2
Gebäudeteile anzubohren. Wenn Sie sich nicht sicher sind, dass die Wand die Kräfte aufnimmt, konsultieren Sie bitte einen Statiker. Befestigungsmaterial: Verwenden Sie je nach Beschaffenheit Ihrer Wand entsprechendes Befestigungsmaterial. Abbildung 2: Einzelteile der Sport-Thieme Basketball Übungsanlage „starr“ Stückliste: Anzahl Bezeichnung...
Seite 3
Gebrauchsanleitung zu Art.-Nr. 115 9501 Montageschritt 1 Befestigen Sie die Konsolen in der gewünschten Höhe an der Wand mit dem Bohrungsabstand von 700mm (siehe Abbildung 3) Verwenden Sie hierzu die mitgelieferten Schrauben und Dübel. Abbildung 3: Bohrungsmaße Wandbefestigung Montageschritt 2 ...
• Der Artikel sollte jährlich einer Sicherheitsrevision durch eine Fachfirma unterzogen werden. Ersatzteile: • Sport-Thieme Basketballkorb „Standard 2.0“ (Art.-Nr.: 287 9505) • Basketball-Board aus MDF 900x600 (Art.-Nr.: 116 1234) Bei Fragen stehen wir Ihnen gerne zur Verfügung. Ihr Sport-Thieme Team...
Sport-Thieme "Fixed" Basketball Practice Unit Thank you for choosing a Sport-Thieme product! Please read the instructions fully before you use it so that you can enjoy the product and safety is guaranteed. Please keep these instructions for future reference. Should you have any questions or requests, we are happy to help.
Seite 6
Instruction Manual for prod. code 115 9501 Modification of products: Modifications of any kind will compromise safety and render the warranty void! Assembly Tools required: drill (12,5 / 14 mm), screwdriver, wrench (16mm) Number of people required: 1-2 Time required: 20 min Wall/ceiling mounting: Before assembling the product, please check the wall it will be attached to.
Seite 7
Instruction Manual for prod. code 115 9501 Assembly step 1 Fasten the side section to the wall at the desired height with the drill hole distance of 700mm (see figure 3). Use the supplied screws und plastic dowels. figure 3: bore dimensions wall mounting Assembly step 2 Drill the basketball board according to the drilling plan shown in figure 4.
Seite 8
Replacement parts: • <Product name> (Prod. code: <123 4567>) • Sport-Thieme basketball hoop „Standard 2.0“ (Prod. code: 287 9505) • Basketball-board MDF 900x600 (Prod. code: 116 1234) Should you have any questions, we are happy to help. Your Sport-Thieme team...