Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instruction
Connection
EN
2.1 Connect suction and discharge hoses
Suction
Discharge
www.herthundbuss.com
95923010
Operation
Important Notes:
If pump has been run dry, to initiate pri-
ming at next use, a small amount of fluid
may need to be introduced into pump
via suction hose
Flow rate is directly related to drill RPM
– Recommended optimum drill speed is
1,200 to 1,500 RPM
3.1 Place suction and discharge hoses then
operate drill to initiate pumping
Operating Instruction
Operation – With Air Ratchet
4.1 Remove mounting screw and upper
section of drill adaptor
Mounting Screw
4.2 Raise Accessory bracket
4.3 Engage ratchet into pump drive
8
9
95923010
4.4 Rotate ratchet to engage into bracket
4.5 Connect hoses - refer step 2.1
4.6 Operate pump - refer step 3.1
EN
Werbung
