Warranty Terms And Conditions - Action Activejet KS-1065BPJ Betriebsanleitung Und Garantiebedingungen

GB
Air Cooler Activejet Selected KS-1065BPJ
Cleaning the air filter:
Take the filter out by sliding it upwards. To prevent filter damage, we recommend that you use a neutral detergent and a soft brush. Rinse the filter
with cool water and, once dry, put it in the correct place.
Water filter (drainer):
Having removed the air filter, take out the water filter. Clean it with a neutral detergent and a soft cloth or brush. Rinse it, dry, and install
in the device. The drainer must be installed horizontally in order to avoid water leakage.
Water container:
Clean the water container with a soft cloth and a neutral detergent. In order to completely remove the container from the device housing, first
remove the screw from under the base and the water pump mounting screw.
POSSIBLE DEFECTS:
If the device is not working, first check the voltage in the power supply socket.
Possible defects, causes and measures to be taken.
Defect Cause
Device is not working. 1. No power.
2. Power supply button on the back
of the device housing is off.
3. Button on the control panel
or the remote controller is off .
Poor device performance. 1. Air filter is dirty or blocked.
2. Air outlet blocked by an object.
Unusual sounds/ knocking sound
1. No water in the container.
in the device.
2. Uneven surface.

WARRANTY TERMS AND CONDITIONS:

1. Air Cooler Activejet Selected KS-1065BPJ is covered by a 24-month warranty. Warranty period begins on the day of purchase.
2. The warranty covers defects caused by: factory defective materials, any errors made while assembling the device on the production line,
or construction faults.
3. The warranty does not cover defects caused by: any use other than intended and set out in the Operating Manual, device overload that leads
to engine damage or mechanical transmission damage, repairs made by the user or other unauthorised persons, changes made
to the construction, physical and chemical damage due to external factors, damage caused by incorrect assembly and mechanical damage.
4. The warranty does not cover any parts subject to normal wear in the course of use: thermal trips, electrographite brushes, v-belts, tool
fixtures, batteries, power tool end bits.
5. The rating plate should be legible. Any device that is returned in connection with a customer complaint should be cleaned and secured against
transport damage. If possible, the device should be returned in the original packaging.
6. In order to implement warranty proceedings, contact the sales point and present a proof of purchase (receipt, invoice).
7. The warranty is implemented by the sole distributor and owner of the brand: Action SA, Zamienie, ul. Dawidowska 10,
05-500 Piaseczno, Poland.
Measures to be taken
1. Check power supply, check if the cable is plugged in, check
for cable damage.
2. Turn the power on using the ON/OFF switch ( 0/1 )
on the back of the device housing.
3. Press the ON button on the control panel or the remote
controller.
1. Clean the filter in accordance with the guidelines
contained in this operating manual.
2. Remove objects from the air outlet.
1. Refill the container, bear in mind the MIN-MAX range.
2. Place the device on even surface.
MEANING OF THE SYMBOL:
A crossed-out bin symbol means that the device should not be put in regular waste bins. The user is obliged to dispose
of the product in a collection point for the recycling of electrical and electronic equipment waste.
CE DECLARATION OF CONFORMITY:
The device was manufactured in accordance with the existing European standards, including relevant directives and regulations for electrical
products in force in the European Union. Consequently, the product conforms to the rules of safe use and health and environment protection.
Air Cooler Activejet Selected KS-1065BPJ
GB