Warranty Terms And Conditions; Cleaning And Maintenance - Action Activejet MKS-600SZ Betriebsanleitung Und Garantiebedingungen

GB
Mini Air Cooler Activejet Selected MKS-600SZ
1. Pull out the water container. Loosen the screw on the filter cover. Remove the filter cover and pull out the cooling cartridge ( Figure 1 ).
2. Place the cooling inserts in the freezer.
3. After making sure that the inserts are frozen, place them back in the device according to ( Figure 2 ). Replace the filter cover and screw
on the cover.
4. Fill the container with water not exceeding the indicated MAX level, as indicated in this manual.
WATER CONSUMPTION:
1. Water consumption depends on several factors: fan speed, overall air temperature and humidity.
2. Always ensure that the water tank is filled to the marked MAX level and not less than the MIN level.
USE:
Make sure that the device is placed on a flat and level surface away from other heat sources, at a sufficient distance from curtains and other
lightweight materials.
The device is controlled by means of buttons located in the upper part of the front housing.
speed setting
button
1. Plug the USB cable into the adapter (100-220V AC socket voltage) or into a computer, then plug the other end into the rear of the device.
2. Start the device with the On/Off button.
3. Set the desired fan speed using the speed setting button. Selectable 3 speeds; high 3 / medium 2 / low 1. 1,2,3 backlighting indicates current
speed setting.
NOTE: The device is not suitable for diffusion of aromatic oils, perfumes and other substances except pure water.

CLEANING AND MAINTENANCE:

When cleaning the device, the plug must be pulled out from the mains socket. The housing and individual components of the device should be
wiped using a clean, soft cloth with neutral detergents and warm water.
We recommend cleaning the water tank at lest once a week.
To decalcify the device, a 50/50 solution of water and vinegar should be prepared.
POSSIBLE FAULTS:
The device is not intended for self-repair.
Possible faults, causes, and remedies.
on/off
button
Mini Air Cooler Activejet Selected MKS-600SZ
Fault
The device does not work.
Poor output of the device.
Abnormal sounds/clatter inside the device.

WARRANTY TERMS AND CONDITIONS:

1. The Air Cooler Activejet Regular MKS-600SZ comes with a 24 months warranty. The time covered by the warranty is calculated from the date
of purchase of the product.
2. The warranty covers defects caused by: factory material faults, possible faults in the device assembly on the production line
or manufacturing faults.
3. The warranty does not cover defects resulting from: use contrary to the purpose and recommendations of the Instruction Manual, overloading
the device leading to the damage of the engine or mechanical transmission components, making repairs on one's own or by unauthorized
persons, making construction changes, physical and chemical damage caused by external factors and damage caused by improper assembly
as well as mechanical damage.
4. The warranty does not cover parts subject to natural wear during operation: thermal fuses, electrographite brushes, V-belts, tool holders,
batteries, working tips of power tools.
5. The nameplate of the device should be legible. The claimed product should be carefully cleaned and protected against any damage in transit.
As far as possible, provide the device in the original packaging.
6. In order to make use of the warranty, you should report to the point of purchase along with the proof of purchase (receipt, invoice).
7. The warranty is carried out by the sole distributor and owner of the brand: Action SA, Zamienie, ul. Dawidowska 10, 05-500 Piaseczno, Poland.
MEANING OF THE SYMBOL:
A crossed out trash bin symbol means that the device should not be disposed of in normal waste containers.
It is the responsibility of the user to hand over the used equipment to the collection points for the recycling of waste
generated from electrical and electronic equipment.
CE DECLARATION OF CONFORMITY:
The device has been manufactured in accordance with the applicable European standards, including the relevant directives and regulations
in force in the European Union for electrical products. This means that the product complies with the principles of safe use, health
and environmental protection.
Cause Remedy
1. No power supply. 1. Check the power supply; ensure
that the cable is connected to
the socket and not damaged.
2. The button on the control panel 2. Press the ON/OFF button
is switched off. on the control panel.
Air outlet blocked by Remove foreign bodies
a foreign body. from the air outlet.
1. Empty tank. 1. Refill the water tank.
2. Uneven surface. 2. Place the device on a level
surface.
3. Foreign body inside the device. 3. Remove any foreign body from
the device.
GB