Clean Air Optima CA-404W Gebrauchsanweisung Seite 4

Features
1. Stepless Speed Switch Knob with 24 speed levels.
2. Timer function 1 - 12 hours.
3. Remote control function.
4. Negative ion >3.000.000 /cm³.
5. Oscillation function, automatic swing in horizontal direction up to 80°; manual swing
in vertical direction up to 180°.
6. Sleep Air Flow mode.
7. The display led lights will automatically turn off after 1 minute of use and or inactivity
of the display.
8. Foldable for easy storage.
9. Uninterruptible power memory function.
10. Dynamic Natural Air Flow
Installation and Operating instructions
The package contains: circulator-fan, remote control and instruction manual.
Assembling the device
1. Take out the device from the package.
2. Carefully put the device on a stable surface.
3. The device needs to be positioned at least 20 cm from a wall.
Operating Functions
Plug in the device: you will hear an acoustic sound "Bi, Bi".
ON/OFF button
Press the
Steppless Speed Switch Knob
Turn the
will show the corresponding wind speed level. If you continue to rotate to the right you will
reach an maximum wind speed level of 24 and you will hear the acoustic sound "Bi". Rotate the
switch knob to the left to decrease the wind speed level. If you continue to rotate to the
left you will reach an minimum wind speed level of 1 and you will hear the acoustic sound "Bi".
Dynamic Natural Air Flow
Press the
show level 8. Use the
switch back to 16 and 8 by rotating the
4
button, the circulator-fan starts working. Press it again, the device turns off.
switch knob to the right to increase the wind speed levels. The digital display
button, to turn on the Dynamic Natural Air Flow mode, the digital display will
switch knob and rotate to the right to switch to level 16 and 24 or
switch knob to the left.