Mounting Location - Thetford Marine COMPACT LINE Aufstellungs- Und Gebrauchsanleitung

WARNING: Comply with the standards in force when designing and installing the
blackwater systems and during the flushing procedures.
Before beginning the installation, consider and program the following:
3.1

Mounting location

Ideally, the toilet should be installed in a location that is higher than the holding tank.
■
A (maximum) 6' rise between the toilet and holding tank will not impact performance.
Using toilet and supplied template, verify that the installation site has:
■
o sufficient clearance between toilet and nearby wall so that water supply hose
and discharge hose are not kinked
o room for maintenance and accessibility
The floor supporting the toilet is level and strong enough to support toilet and weight
■
of any potential user.
The floor structure is strong enough to securely anchor toilet using supplied screws;
■
3/4" minimum.
The flooring is water-resistant so structure and anchoring integrity are maintained.
■
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Compact line | Installation and use manual | ENG
43
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com