Tomado TMA7000B Gebrauchsanleitung Seite 22

AUTOMATIC POSITION
When using the automatic position, the appliance automatically selects whether it should cool or circulate air. ThisЇmodeЇcanЇonly be adjusted with the remote control.
This depends on the room temperature.
• Press the mode key [mode] until the arrow on the display lights up at the auto mode.
• Press the [ temp  and temp  ] keys to set the required room temperature (between 17°C and 30°C). 23°C for example. When the room temperature is below 23°C, the appliance starts
to circulate the air, and above 23°C the appliance starts to cool.
• It is not possible to adjust the wind speed in this mode.
SLEEP MODE
Use the sleep mode when you want to use the appliance at night. This mode can only be adjusted with the remote control.
• Switch on the appliance in the cooling or auto position.
• Press the sleep key.
• If the display light on the appliance bothers you, you can switch it off by pressing the [led display] key. Press the key once more to reactivate the display light.
The sleep mode maintains the optimum temperature in the room, without excessive fluctuations in temperature and air humidity. Slightly vary room temperature and air humidity to make
sure the room remains comfortable.
The selected temperature will rise every half hour by 1°C for a period of one hour. This new temperature is maintained for the next 7 hours. Then the appliance switches back to the set
temperature and remains on in accordance to its setting.
The sleep mode can be cancelled by switching off the appliance, or by pressing the sleep, mode or wind speed key.When using the air circulation and dehumidification positions, it is not
possible to use the sleep mode.
ADJUSTING THE TIMER
The timer function can be used to allow the air conditioner to switch on automatically (delayed start) or switch off automatically at a set time (automatic deactivation).
Delayed start
• Press the timer key on when the air conditioner is off. Repeatedly press the key on. The starting time is delayed by half an hour each time, up to a total of 10 hours. If you want to
delay the start by more than 10 hours, an hour is added each time until a maximum of 24 hours.
• The set number of hours is shown in the display. Once the temperature is shown on the display again, the setting has been confirmed.
• When the set number of hours have passed, the air conditioner switches on automatically.
To cancel the delayed start, press the timer key on until the display shows 0.0 again.
Automatic deactivation
• Press the timer key off when the air conditioner is on. Repeatedly press the key off. The required time at which you wish the air conditioner to switch off, will be extended by
half an hour each time, up to a total of 10 hours. If you want to delay the deactivation by more than 10 hours, an hour is added each time until a maximum of 24 hours.
• The set number of hours is shown in the display. Once the temperature is shown on the display again, the setting has been confirmed.
• When the set number of hours have passed, the air conditioner switches off automatically.
To cancel the automatic deactivation, press the timer key off until the display shows 0.0 again.
The settings can also be combined.
RESET BUTTON
The reset button enables you to reset the appliance. All settings are cancelled and the remote control returns
to the factory settings.
• Use a pointy object to press down the reset button.
LOCK BUTTON
To prevent the settings of the remote control from being changed, you can lock them with the lock button.
• Use a pointy object to activate the lock. A lock appears in the display on the remote control.
• It is no longer possible to control the appliance with the remote control.
• Press the lock button once more to deactivate the lock. The lock disappears and the appliance can be controlled again
by means of the remote control.
DISPLAY LIGHT
• If the display light on the appliance bothers you, you can switch it off by pressing the [led display] key.
Press the key once more to reactivate the display light.
AUTOMATIC RESTART AFTER POWER INTERRUPTION
After a power interruption, the appliance automatically restarts in accordance with the latest settings, once the power supply has been restored.
CHANGING THE TEMPERATURE UNIT CELSIUS / FAHRENHEIT
Simultaneously hold down the + and - keys for 3 seconds to change the display of the temperature unit.
EN - 22