Heinner XI-6060-GR Bedienungsanleitung Seite 12

www.heinner.com
VII. USING INSTRUCTION
The product has many functions such as temperature regulating, spraying, dry ironing,
variable steam, bursting steam, etc. And it with characteristics: luxury shape, high heat
efficiency, easy using, good ironing result, work saving and time saving, and so on.
 Filling water:
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
Pull down the cover of water filling mouth, then fill water
 Spraying:
Press the spraying button, steam will be sprayed out from the spraying nozzle. At
that time, you should keep enough water in the water tank.
 Steam ironing:
1. Use steam ironing, turn the steam control to minimum position and set the
temperature control at the "..." or MAX position.
2. After the indicator goes out, turn the steam control to the suitable position,
steam will be sprayed, ironing can start.
 Bursting steam:
Set the temperature control at the "..." or MAX position, then press down the
bursting steam button, the base plate will spray out bursting steam.
 Dry ironing
Turn the steam control to minimum position, set the temperature control to the
suitable position, you can dry ironing.
 Self-cleaning:
First fill in water, then plug the iron into the mains, set the temperature control to
the maximum position. About 3 minute later, press the self-clean button for about 1
minute, strong steam and hot water will be sprayed to clean the steam chamber. Use
the function once every two weeks.
 Anti-drip:
This iron is equipped with a drip stop function: the iron automatically stops
steaming when the temperature is too low to prevent water from dripping out of the
soleplate.
 Anti-calc:
The Anti-calc function filtrate the minerals from the water to prevent mineral
residue build up at the steam chamber.
Caution, hot surface, please don't touch while using
2000-2400W, 50Hz, 220-240V
11