Record Video - Wiseup W9300 Benutzerhandbuch

IV. Record Video
4.1 Hold down the power button for 2 seconds to turn on the camera, the camera will vibrate once,
the red indicator light will be solid on, indicating that the camera has entered into standby mode.
4.2 Press the power button once to start video recording. The camera will vibrate 3 times, the red
indicator light will flash 3 times and then go off.
4.3 Press the power button once again to stop video recording. The camera will vibrate once, the
red indicator light will be solid on, indicating that the camera has been returned to the standby
mode.