LGB 21410 Handbuch Seite 8

Register Assignment
CV 52 Function mapping: Headlight
CV 53 function mapping: Rearlight
Hand-off function and "Back-EMF"
0 = hand-off function off, Back-EMF off
1 = hand-off function on, Back-EMF off
2 = hand-off function off, Back-EMF on
CV 54
3 = hand-off function on, Back-EMF on
Hand-off function on: When operating with 55015, you can adjust direction and
speed for two seconds after selecting a moving loco without causing the loco
to stop.
CV 55 Reset
CV 58 Time „stop" when changing direction (0.5 seconds for each value)
CV 60 Back-EMF: Max. adjustment factor
CV 61 Back-EMF: Adjustment frequency
CV 62 Back-EMF: Maximum adjustment
* Hint: When programming with the 55015 Universal Remote, the following CVs are programmed by input of the number of the
desired CV in CV6 and then input of the desiredfunction value in CV5 (see example page 6).
8
Range Default
— 128
— 64
0 – 3 2
55 —
1 – 255 0
1 – 255 10
0 – 255 5
0 – 255 255