Apricum MECrf Betriebs - Und Montageanweisung

MECrf
Operating Instructions
Product description
The TP RF media coupler MECrf is a KNX RF Ready S-mode (RF1.R) router
for connecting KNX RF line and KNX TP line, or more exact, for connecting
KNX RF devices to the TP installation. MECrf can establish direct connections
to RF devices, and can also be used as a retransmitter. Operational and
filtering states, malfunction and faulty communication are indicated by LEDs.
MECrf is able to filter the traffic according to the installation place in the bus
system hierarchy and according to the built-in filter tables for group-oriented
communication. Long messages with up to 201 bytes APDU are supported.
Configuring from subline can be deactivated. Special functions for transmission
of telegrams are available. Filtering can be temporarily deactivated on pressing
the Function button (Manual Function), i.e. to ease commissioning. It can be
activated by a single button press on the device. MECrf then automatically
switches back to normal operation after a configurable time period.
Requirements of Directives RED and RoHS are met. Standards for residential,
commercial, and industrial environments are fulfilled.
Hereby, Apricum d.o.o. declares that the radio equipment type MECrf is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.apricum.com/mecrf
Technical specifications
Power input
Power supply:
Current consumption:
Housing
Dimensions (HxWxD):
KNX RF connection:
KNX bus connection:
Weight:
Environmental conditions
Operating temperature:
Storage temperature:
Ambient humidity:
RF data
Frequency range:
Tx transmit power:
RF range:
Mounting, commissioning and safety notes
• After connection to the KNX bus system, the device works with its
default settings as intended
Warning: Do not connect to 230 V. The device is supplied by the KNX
•
bus and does not require any additional external power supply
• The device may only be installed and put into operation by a qualified
electrician or authorized person
• For planning and construction of electric installations the appropriate
specifications, guidelines and regulations in force of the respective
country have to be complied
• Do not mount directly on a metal rail or a metal fastener
• Make sure that during operation a minimum distance of 20 cm to the
human body, conducting surfaces and objects is kept
• Connect the KNX bus line as for common KNX bus connections with a
KNX bus cable, to be stripped and plugged into the KNX TP connector
• Do not damage electrical insulations when connecting
• Installation only in dry locations
• Accessibility of the device for operation and visual inspection must be
provided
• For configuring, use the ETS
Release version/date: R1.6 / December 2020
© 2001-2020 Apricum d.o.o.
Mažuranićeva 4, 21312 Podstrana, Hrvatska
Details, modifications and corrections may be subject to change without notice. Apricum gives no warranty for the accuracy of the document. All rights reserved.
21...30 V DC SELV
< 10 mA
43 x 40 x 11 mm
RF antenna
KNX TP connector (red/black)
15 g
-5...45 °C
-10...70 °C
5...93 % (non-condensing)
868.3 MHz ± 300 kHz
+ 5.9 dBm
100 m
Connectors, buttons and LEDs description
Bus state KNX RF (Subline)
green: Subline OK
Bus state KNX TP (Main line)
green: Main line OK
orange: Manual Function active
red: No TP connection
Telegram traffic KNX RF
green (blinking): Telegram traffic
Telegram traffic KNX TP
green (blinking): Telegram traffic
red: Transmission error
Electrical safety
Pollution degree (IEC60664):
Protection type (IEC60529):
Protection class (IEC61140):
Overvoltage category (IEC60664):
Approbation (ISO/IEC14543-3):
CE Marking
EU Directives:
Standards:
Installation and maintenance
• The housing must not be opened
• Protect the device from moisture, dirt and damage
• The device needs no maintenance
• If necessary, the device can be cleaned with a dry cloth
• In the case of damage (at storage, transport) no repairs may be carried
out by unauthorized persons
• Configuration details and ETS database:
RF antenna
Function
B
button
Programming
button
KNX TP
D
connector
Physical (Indiv.) Address routing
green: Filter active
yellow: Route all
orange: Block all
<off>: Settings for main line
and subline are different
Group Address routing
green: Filter active
orange: Route all
red: Block all
<off>: Main line/subline different
Programming LED
red: Programming Mode active
2
IP20
III
II
KNX-certified
RED (2014/53/EU)
RoHS (2011/65/EU)
ETSI EN300220-1/-2
EN301489-1/-3
EN50581
EN50663
EN61000-6-2/-3
EN62368-1
EN62479
EN IEC 63044-5-2
www.apricum.com/mecrf