Optical / Coaxial / Hdmi Arc / Aux Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices; Listen To Music From Bluetooth Device - Hisense HS212F Benutzerhandbuch

OPTICAL/COAXIAL/HDMI
ARC/AUX Operation
1 Ensure that the unit is connected to the TV or
audio device.
EN
2 Press the button repeatedly on the unit or
on the remote control to select the OPTICAL,
COAXIAL, HDMI ARC, BT, USB, AUX mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player,
etc.) is set to PCM or Dolby Digital (Refer to
the user manual of the input source device
for its audio setting details) with HDMI ARC /
OPTICAl / COAXIAL input.

Bluetooth Operation

Pair Bluetooth-enabled Devices

player, you need to pair your device to this player.
Note:
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 D u r i n g O N m o d e, p re s s t h e
repeatedly on the unit or the
the remote control to select Bluetooth mode.
"NO BT" will show on the display if the unit is
not paired to any Bluetooth device.
2 Activate your Bluetooth device and select the
search mode. "Hisense HS212F " will appear on
your Bluetooth device list.
-
searchable. The display will show "PAIR" and
you will hear "Pairing" from the unit.
3 Select "Hisense HS212F " in the pairing list. After
successful pairing, you will hear "Paired" from
the unit, and the display panel shows "BT".
4 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device.
The Bluetooth device will be disconnected from the
unit after the "Disconnected" voice prompt.
- Press and hold the
remote control.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
• The player will also be disconnected when your
device is moved beyond the operational range.
• If you want to reconnect your device to this
player, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
• If the connection is lost, follow the instructions
above to pair your device to the player again.

Listen to Music from Bluetooth Device

- If the connected Bluetooth device supports
Advanced Audio Distribution Pro le (A2DP),
you can listen to the music stored on the
device through the player.
- If the device also supports Audio Video Remote
Control Pro le (AVRCP), you can use the
player's remote control to play music stored on
the device.
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play (if
it supports AVRCP).
- To pause/resume play, press the
b u t to n
button on the remote control.
(BT) button on
- To skip to a track, press the
buttons on the remote control.
12
button on the remote control to be
button on the
press and hold the
/