Herunterladen Diese Seite drucken

S.C.A.T. Europe SymLine 90 Serie Montage- Und Einbauanleitung Seite 19

Entsorgungssysteme

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5a.
4a.
5b.
5c.
1
2
Channels
www.symline.de
Waste System with tubing and
Type 90 underbench waste cabinets
PREPARATION:
-SWITCH AMPLIFIER
-BUILT-IN-SIGNALBOX
-EXHAUST AIR CONTROL
5a.
The switch amplifier is mounted
at the rear side of the safety
cabinet. Connectable cables go
out and are marked with "Power
connection" and „Sensor 1 to 4"
(„Sensor 1 to 2" for underbench
cabinet with one hinged door).
5b.
For the power supply, 2 free
power sockets are needed.
For the underbench cabinet
with 1 hinged door:
1x Switch amplifier
1x „Built-in-Signalbox
For the under bench cabinet
with 2 hinged doors, 3 free
power sockets are needed:
1x Switch amplifier
2x „Built-in-Signalbox
5c.
The „Built-in-Signalbox
with a front panel and also with
a table-top frame/stand.
Underbench cabinet with
1 hinged door:
1x „Built-in-Signalbox
2 channels
1x Level control
1x Exhaust air control, if present
Underbench cabinet with
2 hinged doors:
2x „Built-in-Signalbox
4 channels
3x Level control
1x Exhaust air control, if present
!
The exhaust air control is
optional: If needed, it is
connected to Channel 2 (1-door
cabinets) or Channel 4 (2-door
cabinets). Otherwise, these
channels remain unused.
Do NOT connect its cable
to the „Built-in-Signalbox
The user manual for the
"Built-in-Signalbox
within the scope of delivery.
It is also available online at:
www.symline.de and
www.scat-europe.com
19
Sym Line ® is a Brand of
2
EN
"
2
"
2
" comes
2
" =
2
" =
2
".
2
" is
2

Werbung

loading