Mounting The Bracket - Samsung 460UT Montageanweisungen

Mounting the bracket

1. Fix the bracket tightly against the wall using the wood screws.
1 5
7
3
As shown in the picture above, fasten in order from
N If it is difficult to fasten the screws into the specific holes, fasten the screws in the adjacent holes.
Installing the Video Wall
3
1
N Installing the Video Wall should be done by two persons or more.
N The couplers are only used to install a Video Wall in order to leave a gap between the monitors that make up
the Video Wall. Do not use them when installing only one monitor.
BN68-01537F.indb 3
onto a wall
6 2
8
4
to
4
2
English - 3
How to fasten a screw
Make a hole using a 3X50
drill.
Clean the inside of the
drilled hole.
Fasten the wood screw into
the hole.
When drilling a hole into a wall, make sure
you use a drill bit and drill of the specified
diameter.
Otherwise, there may be safety problems.
] Warning
1. Ensure you check the wall strength, and do
the reinforcing work before installation if the
wall is not sufficiently strong.
2. The provided screws are for wood.
3. Check the wall and use proper screws
according to the material of the wall, such as
marble, steel plate or concrete.
.
] Warning
1. Before you install on the Video
Wall, check the wall strength
considering the total weight of the
monitors and brackets you want
to install.
- Weight of a monitor: 30kg
- Weight of a bracket: 7kg
2. If you intend to install on a Video
Wall that is four layers or more,
take into consideration the air
conditioning system. Consult with
an expert before installation as
heat from the monitors may cause
problems.
2009-12-18 12:17:52