1070087037 | PSI 6xxx.200
7
Features
Sequence standard 1000 Hz (sequence parameters in milliseconds)
I/O Module : PS5 Comnet-M-DP module
(Details refer to Tab1. Required and supplementary documentation,
Rexroth PSI6xxx Medium-Frequency Inverter Instruction Manual.).
7.1
Special features
The welding controller features the following specifics:
Timer has been prepared for networking with a Profibus-FMS module, an
Interbus_S (PMS) module or an Ethernet module.
'Initial dressing' possible
Without 'Current passed without command' function
The 'Stop circuit open / no 24 V' fault is automatically reset.
The DC link voltage is always checked, the fault message is automatically
reset.
Bosch Rexroth AG
33/38
Features